EnGenius EnStation 5 N300 Outdoor Access Point/Client Bridge

Buy EnGenius EnStation 5 N300 Outdoor Access Point/Client Bridge online on Vmart.pk with cash on delivery service in Karachi, Lahore, Islamabad and Rawalpindi. Buy complete range of EnGenius products online at vmart.pk with free home delivery in Pakistan.

Features

The EnStation5 is a 5 GHz High-Powered, Long-Distance Wireless N300 Outdoor AP/Client Bridge with a high-gain 19 dBi dual-polarization internal directional antenna ideal for Point-to-Point deployments up to 4 miles. It includes two (2) Fast Ethernet ports and is housed in an IP55-rated waterproof housing to maintain robust performance even in harsh environments. Its dedicated 5 GHz frequency band avoids access points and client devices on the more congested 2.4 GHz frequency making it a smart solution for streaming video data for IP Cameras monitoring parking lots and it includes an additional Fast Ethernet Port (LAN 2) to connect a camera for this type of application.

Going The Distance. EnGenius EnStations are Outdoor Wireless Access Points that feature high 26 dBm output power and high receive sensitivity coupled with embedded high-gain directional antennas that emit a narrow signal beam to deliver robust and stable connectivity over extremely long distances — up to 4 miles in clear line-of-sight point-to-point deployments! EnStations, therefore, are ideal for:

• extending networks in large campus venues;
• over extensive acreage in industrial, farming or ranching properties;
• in massive indoor structures like arenas, shopping malls, warehouses, convention centers;
• connecting to digital signage;
• or even in more urban environments where there is clear line-of-sight between the EnStation and another Access Point; or between two EnStation units of the same frequency band.

WISP Scenarios. EnStations can be used in Client Bridge mode and pointed to a Wireless Internet Service Provider’s base station making them ideal CPE (Customer Premise Equipment) that can generate recurring revenue for Internet providers. The compact form factor of EnStation also make it acceptable to many homeowners association because they are barely noticeable and unobtrusive additions to home exteriors and usually within the guidelines of a planned community’s architectural standards.

Longer connectivity distances can be achieved when two EnStation units of the same frequency band are paired together in a Point-to-Point (PtP) deployment, and aligning their respective dish-shaped antennas to be directly facing each other so each gets the full impact of the more focused narrow wireless single beam.

EnStation5 supports three (3) operation modes — Access Point, Client Bridge, and WDS Bridge mode. This flexibility makes EnStation5 a versatile solution for IT managers who may need to update or reconfigure their deployments as the needs of their network change.

Each EnStation includes a proprietary PoE injector (EPE-1212) to supply power for the unit while at the same time providing a data connection over the same Ethernet cable. This is especially useful for deployments where a power outlet for the AP/Client Bridge may be scarce or unavailable, for example under the eaves of roofs, or high on light poles.

EnStations are easy to install in virtually any location and their internal electronics have been mounted in an IP55-rated enclosure, one of the highest waterproof and dustproof ratings available, designed to withstand extremely harsh environmental conditions including severe and prolonged exposure to sunlight, extreme cold, frost, snow, rainfall, hail and humidity. These protective measures make EnStations ideal outdoor wireless solutions for virtually any locale or any venue including ski and beach resorts, or desert resort communities.

EnStation5 also employs advanced QoS (Quality of Service) to prioritize bandwidth-intensive applications like video streaming or bandwidth sensitive applications like VoIP (Voice over IP) telephone calls for optimal connectivity.

With EnGenius’ EZ Controller™ Management Software, units that have already been deployed on rooftops or other difficult to access locations and other EnGenius Client Bridges in the network can be reconfigured to a different operational mode or upgraded remotely without having to manually reconnect to them or re-install them onsite.

Specification

Technical Specifications

Hardware

RF:

5 GHz Frequency Band

Standard:

IEEE 802.11a/n

Radio I:

11a/n: 5.180-5.825 GHz

Data Rate:

Up to 300 Mbps in 5 GHz band

Memory:

128MB

Flash Memory:

16MB

Transmit Power:

Up to 26 dBm
Up to 400 mW
Radio Chains/Spatial Streams – 3x3:3

Supported Radio Technologies:

802.11a/n: Orthological Frequency-Division Multiplexing (OFDM)
802.11n with 5/10/20/40 MHz Channel Width
802.11a with 5/10/20 MHz Channel Width
802.11a/n: BPSK, QPSK, 16-QAM, 64-QAM

Supported Data Rates (Mbps):

802.11a: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5~300 (MCS0 to MCS15)

Physical Interface

Two (2) 10/100 BASE-T Ethernet Ports
One (1) Port supports 24V Proprietary PoE Input
One (1) Port supports extension of an Internet signal
Reset Button
LED Signal
Power
LAN 1
LAN 2
WLAN

Antenna

One (1) Internal High-Gain Directional Antenna
19 dBi GHz Antenna
Azimuth Beam Width (Horizontal): 18°
Elevation Beam Width (Vertical): 30°
Point-to-Point Transmission for Long Range Distances
5 GHz (Point 1)
Average Antenna Gain: 19 dBi
Polarization: Linear
Azimuth Beam Width: 30°
Elevation Beam-Width: 18°
VSWR: 1:2.0
5 GHz (Point 2)
Average Antenna Gain: 19 dBi
Polarization: Linear
Horizontal Beam Width: 18°
Elevation Beam-Width: 30°
VSWR: 1:2.0

Power Requirements

Power Source (PoE Injector):
24V/.6A Proprietary Compliant Source
Active Ethernet (Power over Ethernet, PoE)
Power Consumption: 7 W

Management

Auto Channel Selection

Settings varies by Regulatory Domains

Operation Modes

Access Point, Client Bridge, WDS Bridge

LAN

IP (check validity and DHCP server IP range) MAC

SSID

BSSID
Supports Four (4) SSIDs

VLAN Tagging

Independent VLAN settings cab be enabled/disabled
Any packet that enters the device without a VLAN tag will have a VLAN tag inserted via a PVID (Ethernet Port VID)
VLAN Pass-through
VLAN Pass-through over WDS Bridge

SNMP & MIB

V1/v2c/v3 Support
MIB I/II and Private MIB

QoS

Compliant with IEEE 802.11e Standard

Other Management Features

Save Configurations as Default
Saves the customized configuration as the default value for different customer demands
Client Traffic Status
Reports various information in a timely manner as required by the administrator

Management (cont.)

Control Features

RADIUS Accounting
Helps operators to offload 3G to Wi-Fi seamlessly
Settings vary by Regulatory Domains
Distance Control (Ack Timeout)
Multicast Supported
Wi-Fi Scheduler
Sets the Schedule for rebooting the device

Security

WEP Encryption: 64/128/152 bit
WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES)
Hide SSID in Beacons
MAC Address Filtering
Filter up to 50 MAC addresses
Wireless STA (Client) Connection List
Reports various information in a timely manner as required by the administrator
802.1x Authenticator

Environmental & Mechanical

Temperature Range

Operating:

-4º~140ºF/-20ºC~60ºC

Storage:

-22Fº~176ºF/-30ºC~80ºC

Humidity (non-condensing)Operating:

90% or less

Storage:

90% or less

Waterproof

IP55-Rated Enclosure

Certifications

FCC, CE

Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on distance between devices or traffic and bandwidth load in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2014 EnGenius Technologies, Inc. All rights reserved. Compliant with FCC - This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.

Dimensions & Weights

EnStation5 Device (Without Mounting Kit)

Weight:

1.01 lbs. (460 g)

Depth:

7.48” (190 mm)

Height:

1.50” (38 mm)

Package Contents

EnStation5 Outdoor CPE
PoE Injector (EPE-1212) with Power Adapter (24V/.6A)
Pole/Wall Mounting Kit
Mounting Screw Set
Quick Installation Guide