EnGenius ECB300 N300 Indoor Access Point / Client Bridge

Buy EnGenius ECB300 N300 Indoor Access Point / Client Bridge online on Vmart.pk with cash on delivery service in Karachi, Lahore, Islamabad and Rawalpindi. Buy complete range of EnGenius products online at vmart.pk with free home delivery in Pakistan.

Features

This high-powered AP/CB is designed to expand the number of users and devices that can access an existing wireless network within large or multi-story buildings or expansive, client-intensive facilities like hotels, resorts, hospitals, office buildings, universities or other multi-building campus facilities that need to offer employees, guests, staff or students access to network resources like printers, content or the Internet.

The ECB300 can be configured to operate in several modes – as a Wireless-N Access Point, Client Bridge, WDS Access Point, WDS Bridge, Repeater, or AP Router.

The ECB300’s two detachable/upgradeable MIMO (Multiple In/Multiple Out) 5dBi antenna array results in enhanced receive sensitivity and connectivity to access points and wireless clients even in areas where connections have been previously challenging or non-existent.

For deployments on ceilings or in crawlspaces where power outlets may be scarce, the ECB300 is also PoE (Power-over-Ethernet) capable when used with a PoE injector, like the 802.3af compliant EnGenius EPE5818af.

The ECB300 also features industry standard wireless network encryption settings, like WEP, and WPA/WPA2, to protect the network from unauthorized access. For small-to-medium-sized office or larger corporate deployments the ECB300 also can be configured with MAC address filtering so only known and MAC address recognized client devices can access the network and unauthorized client devices can be isolated.

The ECB300 includes EZ Controller Access Point Management software that provides a robust suite of tools for IT managers, installers and network administrators who deploy, manage and maintain wireless networks. With EZ Controller, EnGenius Wireless Indoor and Outdoor Access Points and Client Bridges can be configured, controlled and monitored from one central location

Specification

Technical Specifications

Hardware

RF: 2.4 GHz Frequency Band

Standard: IEEE 802.11b/g/n

IEEE 802.11b/g: 2.400~2.484 GHz

Data Rate: Up to 300 Mbps

Memory: 32MB

Flash Memory: 4MB

Peak Power: Up to 9W

Antenna

Two (2) External 5 dBi Omni-Directional SMA Antennas (diversity support)

Physical Interface

1 x RJ-45 Fast Ethernet (10/100 Mbps)
1 x Reset Button
Power Jack

LEDs Status

Power
LAN (10/100 Mbps)
WLAN (Wireless Connection)

Power Requirements

Power Supply:

90 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)

Active Ethernet (Power-over-Ethernet, IEEE 802.3af)
Power Adapter (United States) 48VDC/0.375A

Device: 12V/1A

Modulations

OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK

Operating Channels

2.4 GHz: US/Canada 1-11

Receiver Sensitivity

802.11b (2.412~2.472 GHz) best ≤ -98 dBm
802.11g (2.412~2.472 GHz) best ≤ -93 dBm
802.11n (2.412~2.472 GHz) best ≤ -93 dBm

Available Transmit Power

(Max. Power may be different depending on local regulations)

802.11b (2.412~2.472 GHz)
29 dBm @ 1~11 Mbps
802.11g (2.412~2.472 GHz)
29 dBm @ 6 Mbps
29 dBm @ 9 Mbps
28 dBm @ 12 Mbps
28 dBm @ 18 Mbps
24 dBm @ 24 Mbps
24 dBm @ 36 Mbps
23 dBm @ 48 Mbps
23 dBm @ 54 Mbps

802.11n (2.412~2.472 GHz)
26 dBm @ MCS0/MCS8
26 dBm @ MCS1/MCS9
25 dBm @ MCS2/MCS10
25 dBm @ MCS3/MCS11
24 dBm @ MCS4/MCS12
24 dBm @ MCS5/MCS13
23 dBm @ MCS6/MCS14
23 dBm @ MCS7/MCS15

Software

Topology

Infrastructure/Ad-Hoc

Operation Modes

Access Point, Client Bridge, WDS Bridge, WDS Access Point, WDS Station, Universal Repeater, Access Point Router, Client Router

Multiple BSSID

Supports up to 8 BSSIDs

LAN

IP (check validity and DHCP server IP range)

DHCP Server

DHCP range, lease time, client list

SSID-to-VLAN Tagging

Supports 802.1q SSID-to-VLAN tagging

Spanning Tree

Supports 802.1d Spanning Tree Protocol

Wireless

Wireless Mode: 11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/g/n mix, 11b only, 11b/g, 11g only

QoS

WMM (Wireless Multimedia)

VPN

Pass-through (PPTP, L2TP, IPSec)

WPS

Software only

Management

Tx Power Control:

Adjust transmit power by dBm

Configuration:
Web-based configuration (http)/Telnet

Telnet Server:

CLI

Firmware Upgrade:

Via web browser, settings are reserved after upgrade

Administrator Setting:

Administrator Username and Password Change

Reset Setting:

Reboot (press 1 second).
Reset to factory default (press 10 seconds)

System Monitoring:

Status Statistic and Event Log

SNMP:

V1, V2c

MIB:

MIB I, MIB II (RFC1213) and private MIB

Traffic Measurement:

Per interface

Auto-channel Selection:

Automatically selecting least congested channel

Bandwidth Measurement:

IP range and bandwidth management

Backup and Restore:

Save and restore settings through Web interface

Diagnosis:

IP pinging statistics

Wireless / Network

PPPoE: Point-to-Point Protocol over Ethernet in Client Router mode
(this function will keep trying when failed or disconnected)

PPTP: Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks

Wireless Security

WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID broadcast enable/disable
MAC Address Filtering, Up to 50 fields
L2 Isolation (Access Point mode)
Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics)

Environmental & Physical

Temperature Range

Operating: 0ºC to 50ºC (32ºF to 122ºF)

Storage: -20ºC to 60ºC (-4Fº to 140ºF)

Humidity (non-condensing)

Operating: 90% or less

Storage: 90% or less

Certifications

FCC, IC

Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved.

Dimensions & Weights

ECB300 Device

Weight: 0.77 lbs.

Length: 5.32”

Width: 4.14”

Height: 1.18”

Package Contents

ECB300 N300 Indoor Access Point/Client Bridge
12V/1A Power Adapter
RJ-45 Ethernet Cable
Quick Installation Guide
CD with User Manual