Highlights
● Provides affordable high-bandwidth 802.11n wireless connectivity for demanding applications
● Easy to set up and manage by using the configuration wizard
● Single Point Setup simplifies the deployment of multiple wireless access points
● Safeguards business information with enhanced security, including advanced encryption, highly secure authentication, and rogue access point detection
● Attractive design with internal antennas offers flexible installation options
● Can connect to a Power over Ethernet (PoE) switch or injector, simplifying installation and eliminating the need for expensive additional wiring
Product Overview
In an increasingly mobile workplace, providing secure, high-speed wireless connectivity to employees and guests is more important than ever. The Cisco WAP121 Wireless-N Access Point with Single Point Setup is an easy, affordable way to improve the performance and reach of your small business network with advanced 802.11n wireless technology. This flexible solution is ideal for connecting up to 10 employees on a single access point. With Single Point Setup controllerless multi-access point deployment technology, the wireless LAN can scale up to four WAP121s to provide broader coverage and support additional users as business needs change.
Designed for today’s performance-intensive applications, the Cisco WAP121 employs 802.11n wireless technology to deliver high throughput and extended range throughout your office. It features built-in quality-of-service (QoS) features that let you prioritize bandwidth-sensitive traffic, enabling the deployment of business-quality voice over IP (VoIP) and video applications.
The Cisco WAP121 is simple to set up and use, with intuitive wizard-based configuration to get you up and running in minutes. A sleek, compact design with flexible mounting options enables the access point to smoothly blend into any small business environment. Support for PoE makes the device easy to install without the need for separate power plugs or expensive new wiring.
To enhance reliability and safeguard sensitive business information, the Cisco WAP121 supports both Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA2), encoding all your wireless transmissions with powerful encryption. In addition, 802.1X RADIUS authentication helps keep unauthorized users out. For organizations that need to provide secure wireless access to employees, customers, and partners, it also provides support for separate virtual networks, with granular configuration options that let you provide the appropriate level of access for different users.
Single Point Setup provides a unique centralized method to administer and control wireless services across multiple access points. Via one access point on the LAN you have a single view of the whole WLAN to replicate configuration, security, and management across all access points.
With the Cisco WAP121, you can extend highly secure business-class wireless networking anywhere in the office, with the reliability and flexibility to meet changing business needs.
Figure 1 shows a typical configuration using this wireless access point. Figures 2 and 3 show the front and back, respectively, of the Cisco WAP121 Wireless-N Access Point with Single Point Setup.
Figure 1. Typical Configuration Typical Configuration
Figure 2. Front Panel of the Cisco WAP121 Wireless-N Access Point with Single Point Setup
Figure 3. Back Panel of the Cisco WAP121 Wireless-N Access Point with Single Point Setup
Specifications
Standards
IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Ports
LAN Fast Ethernet auto sensing, DC jack
Switch
Power button (on/off)
Buttons
Power (on/off) push button, Reset button
Cabling type
Category 5e or better
Antennas
Internal antennas optimized for wall, ceiling, or desktop placement
LEDs
Power, WLAN, LAN
Operating system
Linux
Physical Interfaces
Ports
10BASE-T/100BASE-TX Ethernet, 12V DC power with support for 802.3af PoE
Power supply
External 12V 0.5A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af PoE
Buttons
Power (on/off) push button; Reset button
Lock slot
Slot for Kensington lock
LED
Power, Wireless, Ethernet
Physical Specifications
Physical dimensions (W x D x H)
4.89 x 4.89 1.38 in. (124.17 x 124.17 x 35 mm)
Weight
0.37 lb or 168 g
PoE
PoE
802.3af
Peak PoE power
6W
Network Capabilities
VLAN support
Yes
Number of VLANs
1 management VLAN plus 4 VLANs for Service Set ID (SSID)
Multiple SSIDs
4
802.1X supplicant
Yes
SSID to VLAN mapping
Yes
Auto channel selection
Yes
Spanning tree
Yes
Load balancing
Yes
IPv6
Yes
● IPv6 host support
● IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
Layer 2
802.1Q-based VLANS, 4 active VLANS plus 1 management VLAN
Security
WPA/WPA2/WEP
Yes, including Enterprise authentication
Access control
Yes, management access control list (ACL) plus MAC ACL
Secure management
HTTPS
Wi-Fi Protected Setup (WPS)
Yes (soft WPS, no hardware push button)
SSID broadcast
Yes
Rogue access point detection
Yes
Mounting and Physical Security
Multiple mounting options
Desktop installation; mounting bracket included for easy ceiling or wall mounting
Physical security lock
Kensington lock slot
Quality of Service
QoS
Wi-Fi Multimedia & Traffic Specification (WMM TSPEC)
Performance
Wireless throughput
Up to 300 Mbps data rate (real-world throughput will vary)
Recommended user support
Up to 16 connected users, or 10 active users.
Configuration
Web user interface
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Multi-Access Point Management
Single Point Setup
Yes
Maximum access points per cluster
4
Active clients per cluster
40
Management
Management protocols
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote management
Yes
Event logging
Local, remote syslog, email alerts
Network diagnostics
Logging and packet capture
Web firmware upgrade
Firmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration Protocol (DHCP)
DHCP client
IPv6 host
Yes
Wireless
Frequency
Single-band 2.4 GHz
Radio and modulation type
Single radio, orthogonal frequency division multiplexing (OFDM)
WLAN
802.11n
Operating channels
1 to 13 (depending on country)
Channels 1 through 11 (FCC)
Channels 1 through 13 (ETSI)
Wireless isolation
Wireless isolation between clients
External antennas
None
Internal antennas
Internal fixed PIFA antennas
Antenna gain in dBi
2 dBi each antenna
Transmitted output power
● 802.11b @ 11 Mbps: 17 dBm
● 802.11g @ 54 Mbps: 13 dBm
● 802.11n @ HT20HT40, MCS15: 13 dBm
Receiver sensitivity
● 802.11b: 11 Mbps @ –86 dBm
● 802.11g: 54 Mbps @ –71 dBm
● 802.11n: 300 Mbps @ –64 dBm
Wireless Distribution System (WDS)
Yes
Roaming
Yes
Multiple SSIDs
4
Wireless VLAN map
Yes
WLAN security
Yes
WMM
Yes, with unscheduled automatic power save and voice profile
Operating Modes
Access point
Access Point mode, WDS bridging, Workgroup Bridge mode
Environmental
Power
12V, 0.5A DC input, and IEEE802.3af compliant PoE
Certifications
FCC class B, CE, IC, Wi-Fi
Operating temperature
0° to 40°C (32° to 104°F)
Storage temperature
–20° to 70°C (–4° to 158°F)
Operating humidity
10% to 85% noncondensing
Storage humidity
5% to 90% noncondensing
Mean time between failures (MTBF)
531189 hours
Reviews
There are no reviews yet.